Aluminum Die Casting Machines Used in Injectionpreadmin
Hot Cabin Piston Casting Machines
Font was placed in a crucible furnace. a cylinder in a position to plunge into the molten metal crucible is mounted. a piston disposed within the cylinder and can be operated in a horizontal state is injected into the metallic mold is provided with a lever system. Mold is filled with molten metal flow and its impact force to be pushed into the cylinder by the lever system if the metal filled into the cylinder piston. The results move in the same direction of the piston seals the holes stuffed mine for the first time. The remaining metal is injected into the mold forces the duct connecting cylinder.
two halves of the mold, suitably mounted on plates. The plates are opened and closed by manual control by the mold locking lever.
Cold Cabin Casting Machines
First a casting operation metal from the molten metal is sufficient, placed machinery was deleted. 2000-2250 mold mine action piston immediately after this movement kg / cm2 presses the pressure can rise up. It is subject to scoop into the mine more than necessary each time. The residual amount molded parts are taken together with the aid of propellant from the mold.